Construction Construction Tape

Walther Strong duct tape


Walther Strong duct tape is tested and verified sealing tape that is highly ductile and is made of polymer acrylic, which makes it waterproof and has an aggressive adhesive. Enveloping duct tape protects what is underneath, such as insulation or ductwork, and the securing duct tape prevents accessories from moving or falling off.

Duct tape is a strong, flexible, cloth duct reinforcement or sealing tape with a rubber-based adhesive system standardized as ASTM D-3675. Duct tape is combined with cement, adhesives, duct sealants and edge sealants to offer duct sealing solutions.

Walther Strong duct tape is manufactured with an acrylic copolymer that meets UL labelling requirements. Walther strong duct tape is designed to meet the physical and chemical requirements of ASTM D-3751, UL 723, CSA O115.4 (94) or 45 CFR 164.15(b), which are standard testing methods for duct cladding products for acoustical duct sealing systems


Duct sealants can be used at different intervals depending on duct type, application and environmental conditions. Enveloping duct tape protects what is underneath, such as insulation or ductwork, and securing duct tapes prevents accessories from moving or falling off. The Standard Specification For Heat And Sound Insulating Material – Acoustical Tile Part – 1 General Requirements (UL 723) by Underwriters Laboratories is the duct tape standard for acoustical duct sealants.

Acrylic copolymer technology offers:

  • outstanding durability in high-temperature environments,
  • acid resistance,
  • good ageing resistance,
  • good adhesion to steel surfaces under humidity conditions.

The UL 723 duct tape standard makes it suitable for applications

  • in bathrooms,
  • kitchens
  • and other moist areas where pH levels are higher than normal

Citing these features together with its excellent adhesion to metal substrates, including painted surfaces even when applied over rust or moisture particles, make the Walther strong duct tape a unique product of choice.

Unique duct tapes are available for duct insulation, duct sealing and duct termination. Each type of duct tape is made according to its specific application requirements.

Walther Strong duct tape is an ideal product for duct insulation, where the use of the standard 9oz cotton duck fabric will often result in excessive loss of insulating value due to air leakage. The high-density polyethylene film used on Walther strong duct tape provides superior moisture resistance with low air infiltration than cotton fabric or paper-facing duct tapes. A factor that cuts energy costs while providing improved comfort for building occupants.

Duct tape can be combined with adhesives, cement, edge sealants and acoustical sealants to complete duct sealing depending on specific application needs.

Benefits of duct tape:

  • lasts for a long time,
  • waterproof and flexible duct tape,
  • gives ductwork a neat and clean appearance,
  • it is easy to apply duct tape.
  • Bad weather resistance
  • Acid resistance


  • First, you take the duct tape and tear it into two long narrow strips. You need to take duct tape that is wider than double the width of the duct. Apply the duct tape horizontally to the seam you are sealing.
  • Start from one end of duct tape and apply it over the duct.
  • Repeat Step #1 and Step #2 until you completely seal the duct.
Construction Construction Tape

Best Double Sided Tape: Top 3 Brands To Choose From

There are many different types of tape on the market, but one that stands out from the rest is the double sided tape. This type of tape sticks better than any other, and can be used on a variety of materials. It’s also easy to remove if you need to take it off.

However, not all brands are created equal. So here are three brands of double-sided tape that you should consider before buying one for yourself.


Double-sided tape is a type of adhesive that attaches two surfaces together. It is typically available in long strips of tape that stick to both surfaces.

Double sided tape has a wide variety of uses because it can stick to almost any surface.

One use for double sided adhesive is fixing clothing such as buttons and zippers. You can also use it for other purposes such as attaching posters or pictures to walls, and attaching decorations to cakes.

There are many different brands of double sided tape on the market, but not all brands are created equal. The best ones will stick well and remove cleanly. Below, we’ll discuss three top brands of double sided tape that are worth trying!

  1. Duck Tape

Duck Tape is one of the most well-known brands of double-sided adhesive. It is very strong and sticks well, but it can be difficult to remove once applied.

  1. Scotch

This brand is one of the most recognizable brands of double-sided adhesive on the market today. The tape is easy to remove once applied, but some people have complained that it does not stick well or stay stuck for very long.

  1. 3M

This is an excellent brand of double sided adhesive


Double sided tape is a type of adhesive that sticks to two surfaces, so one side sticks to the surface, and the other side sticks to the other surface. The adhesive properties are so strong that it can even be used underwater!

Double sided tape has a lot of benefits, but so does high-quality double sided tape. If you use a low-quality brand of tape, it will not stick well and will peel off easily. A high-quality double sided tape will stick well and will not come off easily.

Using a high-quality brand of double sided (or any type of) tape will make your life easier and your projects more successful. When you use quality products, your work will turn out better and you’ll be more satisfied with the end result. So, next time you go shopping for double sided tape, make sure it’s a high-quality brand!


3M Scotch

3M Scotch can be found at most major retailers, including Walmart. Its double sided tape is both strong and durable. It has a good grip to it and sticks well, making this a good option for many different jobs.

Tapes That Matter

Tapes that Matter is a company that specializes in tapes. They have a variety of different types of tape, including double sided tape. This brand of tape is easily removable and is low-tack, meaning it won’t leave a residue on surfaces.

Scotch Removable Tape

Scotch Removable Tape is one of the best options for those who need a double sided tape that can easily be removed from surfaces. It has a low-tack adhesive that will not leave behind any sticky residue.


This concludes our post! We hope that you’ve found the information we’ve shared helpful and inspiring.

If you want to learn more about other products, be sure to subscribe to our blog where we keep you up-to-date on the latest news and offers.

Construction Tape

Ways to use construction tape

Construction tape, also known as contractor or painter’s tape, is a pressure-sensitive adhesive tape with strong adhesive properties.

Construction tape comes in a variety of sizes and can be used for several different tasks. Here are different ways that you can use construction paper to get the most out of it:


Construction tape is the best option for this purpose due to its durability and ability to last through any weather conditions. Regular masking tape does not have the strength to mark outlines on turf or concrete, but construction tape can be pulled off without leaving any adhesive residue (which would need to be cleaned up later).


Painting is easier when you use a drop cloth; however, this often causes problems during clean-up using traditional painter’s tape. This adhesive stays sticky until it comes into contact with paint, which means that it will forever stick to your porous surfaces no matter how many times you try to remove it. You can avoid this hassle by using construction tape instead. Since it does not leave any residue, you don’t have to worry about pulling paint up along with the adhesive later on.


When you use paper or masking tape for labeling, it can tear or fall off easily if your package takes a beating throughout its journey, especially if the label is made out of anything other than sturdy cardboard. Construction tape has increased durability because it’s designed to be applied in outdoor settings where shifting weather conditions could easily rip paper labels away from their designated locations. This type of tape will stay stuck through rain, humidity, heat, and more so that your boxes arrive at their destinations unharmed.


You may not realize this, but all of the little bumps and grooves on your wooden furniture are designed to make it easier to move around. Unfortunately, these also mean that they can shift easily if someone bumps them the wrong way (often). You can keep these moving parts in check by placing construction tape at the bottom of each leg. The adhesive won’t damage any surfaces or leave residue behind, and you’ll be able to move your furniture with ease.


Painting is a messy business; even when you use a drop cloth, spills happen all the time. Some color will inevitably get onto whatever surface surrounds your project area (walls, floors, furniture, etc.). This transfer can be prevented by applying construction tape around the edges of your workspace before you start. Once the paint dries, you’ll be able to peel off this tape and reveal perfect boundaries between different colors.


When using heavy machinery around the house, it’s almost impossible to avoid kicking up dust and dirt that settle into carpet fibers. Not only is this frustrating for people with allergies or other respiratory conditions, but it also makes cleaning projects more difficult than they need to be because just brushing away all that debris doesn’t guarantee that your carpets are free of stains. One way to get around this problem is by laying down construction tape before you start your project. If any paint spills, it will be absorbed by the tape instead of seeping into carpet fibers, where it can be difficult to remove.


Construction tape is a great alternative to masking and painters’ tape because it doesn’t leave any residue behind and can be reused time and time again. By using this type of tape instead, you’ll be able to avoid hassles that are associated with other types of adhesives.

Construction Construction Tape

Acoustic Joist Tape- Soundproofing Tape for Studwork and Joist

Are your neighbors’ noises keeping you awake at night, or do you work from home and struggle to focus due to the sounds outside your door? Do you value quiet and solitude and wish your house was more peaceful, or do you maybe have a loud pastime or profession and want to avoid disturbing others?

Acoustic Joist Tape UK is a novel product that utilizes a cellular membrane to significantly decrease vibration transmission through hard surfaces. This soundproofing tape is very simple to use due to its peel and stick application.

How does this soundproofing tape prevent the transmission of sound and vibration via shared walls, floors and ceilings? Acoustic Joist Tape is composed of a very low-density, viscoelastic cellular rubber, making it an ineffective sound transmitter or conductor. It will disperse acoustic energy. Acoustic Joist Protection Tape is highly flexible and cost-effective due to its ease of application and basic materials.

This is best applied to:

  • Perfect for Noisy Neighbors (Common Walls)
  • Bathrooms.
  • Offices.
  • Classrooms.
  • Conference Rooms
  • Doctors Offices
  • Home Theatres..
  • Laundry Rooms.
  • Mechanical Rooms.
  • Bedrooms.
  • Government/ Law Enforcement Interrogation Rooms.
  • Quiet Rooms.
  • Sound Recording Studios.
  • Yacht/ Boat Engine Rooms

Acoustic joist tape is a kind of sound insulation tape. The insulating substance is constructed entirely of recycled materials, and the backing is self-adhesive. All critical building criteria, such as fire safety, thermal efficiency, sound insulation, and air permeability, have been thoroughly studied and tested to guarantee that the structure meets or exceeds all requirements.

Utilizing acoustic protective joint tape may assist in reducing the overall noise level in your home. The procedure is basic and easy to follow, making it perfect for anybody looking for a quick remedy tp reduce noise and vibrations in their houses. Simple to install, thanks to the self-adhesive backing and acoustic properties that block out annoying noises.

  • Lost conversions are the most frequent use for this kind of insulation.
  • Use on woods, steel studs, and zinc joist, among other things.
  • It has been thoroughly trailed and tested.
  • Assisting you in meeting the requirements of Building Regulations Part E.
  • Using buildings and party barriers, you may help to maximize flanking noise.
  • All wall and floor system should be treated with this product.

It has exceptional noise absorption properties which may decrease impact noise by up to 1-2 times when adhered to the floor or ceiling, for example. Additionally, it is simple to install and use, which is why it is extensively utilized in a variety of sectors, including luxury apartment complexes, retail malls, supermarkets, hotels, and schools.

The superior adhesive for the superior product.

Our business is well-known via word of mouth, as we strive to provide the finest product available to our consumers, We have a large number of devoted consumers that continue to use our goods after ten years! Acoustic Joist Tape: A heavier kin do soundproofing tape that may be used in a variety of environments, including music rooms, theatres and home renovation areas. This tape is also composed of polyethylene or EPDM and is capable of creating an airtight seal and stops sound from moving.

Although designed as a weather or bug strip that prevents outside elements from entering, this a less expensive option that you may put to doors and windows to reduce sound transmission.


Acoustic Joist Tape is a novel product that utilizes a cellular membrane to decrease vibration transmission through hard surfaces. This soundproofing tape is a very simple to use sue to its peel and stick application. Acoustic joist tape is composed of a low-density, viscoelastic cellular rubber, making it an ineffective sound transmitter or conductor. This is best applied to: Perfect for Noisy Neighbors (Common Walls). Mechanical Rooms Acoustic joint protector tape is used to reduce noise and vibrations in a room. Acoustic Joist Tape: Acoustic joint tape is used to reduce noise,